Power Steering

Home Forums General Mercury Discussion Power Steering

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1375


    Can power steering be added to a 1954 Mercury? 


    Power steering was available from the factory in ’54.  You can add it with the proper parts.  You will need a pump, control valve, power (hydraulic) cylinder, and linkage.  You will also need a drive belt for the pump and the hoses to connect your pump to the control valve.  If you get a shop manual for your ’54 (Faxon Auto Literature) there is an entire chapter devoted to power steering.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be to reply to this topic.