Re: 69 Cyclone seat track bolts

[Virgil & Sue Klein]

I can think of a couple of solutions that may work.  Depending on how much of the stud is left you could use a threaded coupler and thread it onto the stud (you may have to clean up some thread to get it started) and then use some threaded stock of the proper size and thread it into the coupler, run it through the floor board, and tighten the nut.  If there is not enough stud left (a common problem for us old guys) I am guessing you will have to drill out the stud and then simply use a bolt and nut of the proper length, diameter, and hardness.