Re: Changing the Oil Pan Gaskets
Home › Forums › Technical Discussion › Changing the Oil Pan Gaskets › Re: Changing the Oil Pan Gaskets
July 21, 2010 at 4:56 pm #2481
Oooooops! sorry guys, I should have mentioned that I have the ’54 4d Monterey !
Thanks for the very helpful instructions, Virgil, they do make a difference as I thought I could only lower the oil pan to slip in the gasket!
One more question please: Is there a way to determine if besides the oil pan gasket, I also have a leak from the rear crankshaft oil seal?
Perhaps once I have gone that far, it might be worthwhile to change the oil seal as well, but thne Ii read on the Fel-Pro oil seal instructions, that I should use a special ‘packing tool’ which i dont have. Any suggestions are welcome!