Forum Replies Created
June 14, 2015 at 1:01 pm in reply to: Where Can Iget FreshAir Inlet Cable – 1952-53 Mercury #4159
Concours Parts in Nevada makes them 800-722-0009
If you have any part of the old seal you could send it to restorationspecialties.com and the will send you free sample to try. They are located in PA.
There is also 1 on EBAY today
I think if you have a newly rebuilt Y-block engine and it was cleaned out properly before the rebuild you should be fine. If you are running an original engine you should keep an eye on the oiling system.
Thanks for you response Virgil, but you need to ask Mac’s for their latest catalog, They don’t use the B5 11572A numbers anymore.
Thanks Virgil but I think those will be hard to find.
Thanks Virgil that clears up a lot, I just didn’t want to be to only IMOA member not parking there.
This came in the new registration email, there is an application and a $35.00 fee for parking there.
Unfortunately I don’t think anybody in selling 54 Merc upholstery sets. You could try SMS auto fabrics( 503-263-3535) for samples and have someone make them for you.
I think if you order the same color, it should be the same gauge
check out this craigslist link http://minneapolis.craigslist.org/hnp/for/4267292240.html
this guy selling a lot of niceparts
Thanks Virgil I saw the same picture, I can’t put it there because I cut the Mercury script out of a Merc valve cover and welded it there. Looks really cool. Fords had it in lower right corner, might have to go with that. Thank again
Thanks for that info guys.
plug your pcv valve an try that, My Merc used 1 1/2 quarts in less than 300 miles. it was sucking oil right out the engine, all that oil and no smoke from the trail pipes. The tail pipes were always wet.